-
TB110201
(MANUAL & AUTOMATIC)
Manual & Automatic Single Chamber Blast Machines
Smallest of the range holding approximately 25 kgs of expandable abrasive. The machine can be fitted with steel grit valve or flat sand valve. Ideal for remedial work, glass etching and general maintenance. Easily transported and has a blast time of approximately 10-15 minutes.
- Machine capacity: 20 lts
- Height: 28 inches
- Diameter: 6 inches
- Wheel size: 10 inches
- Pipework: ½ inch B.S.P.
Manual & Automatic Single Chamber Blast Machines
This machine is the smallest contractor unit in our range. It can be loaded into the back of a small commercial vehicle or estate car by one man with great ease, giving reasonable production rate coupled with lower air consumption. This machine combines the advantages of both price and portability. The machine has a rubber to rubber sealing system, fast filling, low weight, its component parts and spares like all other blast units are interchangeable with machines of comparable size. Simple and effective fail safe remote control system, rugged construction giving a longer life to the pressure vessel, full bore air valves and pipework, extra large inspection port, universal abrasive metering valve, very easy abrasive loading facility. Working pressure of 150 P.S.I., With test pressure of 300 P.S.I., Comes with test certificate.
Specifications
Abrasive capacity 80 kgs, Nett weight of machine fitted with a remote control system 100 kgs., Height of machine 40 inches. Shell diameter 14 inches. Pipe work 1 inch BSP. Air connection 1 inch BSP. Production rate approx 12 to 14 square meters per hour.
Blast System Package
The 14160 machine complete with remote control deadman system , moisture seperator, abrasive metering valve, nozzle, helmet, helmet air filter 20 mm Twinline control hose, 1” x 20 m Blasthose with coupling + nozzle holder, 20 m breathing hose and the pairs leather gloves.
Manual & Automatic Single Chamber Blast Machines
This machine has a low centre of gravity for ease of handling/mobility when used on even ground or difficult site conditions. With good abrasive capacity, this machine will blast up to 10 to 18 square metres per hour. Ideal for use offshore, it combines ease of handling with an adequate size capacity. Simple effective fail safe remote control system, rugged construction fabrication for long life, full bore valves and pipework, extra large inspection port, universal abrasive metering valve, easy abrasive loading facility.
Working pressure of 150 P.S.I., With test pressure of 300 P.S.I., comes with test certificate.
Specifications
Expendable abrasive capacity 150 kgs., Nett weight of machine fitted with a remote control system 140 kgs., Height of machine 42 inches. Diameter of machine 20 inches. Air pipe size 1¼ inch BSP.
Blast System Package
The 20300 automatic machine complete with remote control dead man system, abrasive matering valve, moisture seperator, nozzle, helmet, helmet air filter, 20M Twinline control hose, 1¼”x20 M Blast hose with coupling + nozzle holder, 20 M breathing air holder hose, and the pairs leather gloves.
Manual & Automatic Single Chamber Blast Machines
The machine is a contractor’s machine finished in blue hammerite. The machine is capable of operating continuously at a maximum working pressure of 150 PSI. The machine has been hydraulically pressure tested to 300 PSI. This machine comes complete with test certificate. The machine which optimises abrasive consumption/capacity and ease of handling and increases production rate. Simple effective fail safe remote control system, rugged construction long life fabrication, full bore valves and pipework, extra large inspection port, universal abrasive metering valve.
Specifications
Abrasive capacity – expendable, abrasive capacity for mineral slag 300 kgs., Net. weight of machine fitted with a remote control system 180 kgs. Height of machine 53 inches. Diameter of machine 24 inches. Air pipe size 1¼ inch, air connection size 1½ inch BSP. Approximate rate of production 14 to 20 square meters per hour.
Blast System Package
The 24650 automatic machine complete with remote control dead man system, abrasive metering valve, moisture seperator, nozzle, helmet, helmet air fitter, 20M twinline control hose, 1¼”x20 M Blast hose with coupling + nozzle holder, 20 M breathing air holder hose, and the pairs leather gloves.